Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft by using the Ghost Immobiliser. This system is discrete and does not require any additional key fobs.

The device utilizes buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin sequence that can be altered up to 20 times. This then authorizes the vehicle to start.

Simple process to change the PIN code

Many owners are upgrading their security because of the rising number of vehicle thefts. There are many types of security devices that are sold aftermarket including tracking systems, immobilisers and alarms. However they do not all are equally effective in protecting your car. While a tracking device can assist in finding your vehicle in the event of theft, it will not prevent the crime from occurring in the first place. An immobiliser, on the other hand, does exactly what it says on the label: it shuts off the engine of your car to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to steal your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence which must be entered in order for the engine to start. This can be accomplished using the indicator stalk windows or heater buttons. In addition to this it is possible to use a mobile app which acts as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is especially beneficial if you have to hand your car over to a valet service or parking since the immobiliser will remain activated, but not disabled.

The Ghost is a unique and innovative device which is used in conjunction with the buttons of your car instead of being a separate device. This means it’s not only a highly effective security measure against theft from your vehicle but can also be transferred over to any future cars you own, making it more investment-wise than a traditional steering wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a high-tech security system that protects your pride & joy from key cloning and hacking. It also stops ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly through the CAN bus to stop the motor. It can be plugged into the vehicle without the need for extra wiring and has been thoroughly tested to make sure it is compatible with all vehicles. It is also resistant against jamming devices that are a popular technique used by thieves to circumvent immobilisers.

The advantage of using CAN data is that it operates silently in comparison to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technology as well as recognized by conventional diagnostic tools. The Autowatch ghost immobiliser installers near me doesn’t use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, centre console or door panels, to create a unique disarming sequence. The sequence can be extended to up to 20 presses for extra security. The iPhone app only allows one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is secured.

The Ghost also prevents thieves from stealing a new key or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to run when the correct PIN code is entered. It can be temporarily operated in valet or service mode (with parameters set, such as a 30mph speed limit), so you can offer your vehicle to valet or service without needing to enter a code.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring cost of ghost immobiliser your vehicle and to the engine control unit (ECU). The device intercepts signals to prevent your car from starting normally until you enter a custom code. The system can be turned off or on via your smartphone’s app without the need for extra wires.

The standard factory immobilisers function by using a transponder that is embedded in the key. This transmits a signal to the ECU. The car will begin to start if the correct code is transmitted. However, if a transponder from another vehicle is used instead, the immobiliser doesn’t recognise it. This allows the vehicle start and be stolen. A South African company that is at the forefront of car security systems technology has developed the Ghost immobiliser. It protects you from hacking or key cloning and even key theft. Only by physically towing your car away can thieves steal it, and they would still not be able to drive it.

Ghost 2 immobiliser uses buttons on your vehicle, such as the indicator stalk, steering wheel, as well as the doors, to generate unique PIN codes which must be entered to use your vehicle. This is not required to use additional hardware, immobilisers such as key fobs and can be up to 20 presses long. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals, so thieves are unable to make use of sophisticated RF scanning or code-grabbing technology to discover that the security system has been installed.

Ghost is more difficult to get rid of than car alarms that require disarming with several buttons. This makes it a fantastic alternative to a GPS tracking device which can be used to track your vehicle after it’s been stolen.

Override of emergency PIN code

You don’t have to look far on social media sites to find stories or even videos of vehicles that have been stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the vehicle without your original keys.

The ghost immobiliser price immobiliser helps combat this and provides you with an additional layer of security to prevent your vehicle from being stolen in the event of being targeted by thieves. It is created by creating a unique pin code push sequence using your existing buttons on the steering wheel, door panel and the center console. This unique PIN has to be entered along with your original key fob to stop the vehicle from getting started. The unique override pin is on the black card you will receive following your installation. It’s easy to remember as there are no LED indicators.

The device is hidden in the vehicle’s wiring and does not emit radio signals. Therefore, it cannot be detected by diagnostic software that can determine the type of security system you have installed. This makes it an excellent alternative to the tracker.

Unlike most other security systems, which have a relay inside the engine bay these CANBUS Immobilisers communicate with the car’s ECU and BCM via CAN data bus (brand dependant). This enables them to shut down the vehicle completely through the use of a digital block of commands for both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker to these systems, however this must be stated prior to the installation of the device. They also work with valet and service modes, and are an excellent alternative to a tracking device when you take your car to the dealer for an electrical problem.

Service/Valet Mode

In recent times, there has been an increase in vehicles being stolen with the owners’ keys. With easy access to key cloning equipment and door lock pick sets, it is now much easier for thieves to take your joy and pride. We’ve developed the Autowatch Ghost Immobiliser to combat this. It stops your vehicle from being driven even if you keys have been copied.

It connects directly to your vehicle’s ECU (Engine Control Unit) via the CAN data circuit. It’s completely silent because it does not utilize radio frequencies or key fobs. It can’t be detected by diagnostics or any other hacking device. It also protects the user from using a new ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is hidden inside your car, using buttons on the steering wheel, centre console and door panels. Before you can start your car, you must enter a unique and changeable PIN number that is up to 20 digits.

This is the very first aftermarket CAN-bus immobiliser for the market that has been designed. It will prevent your vehicle from being driven or started when you don’t enter a PIN number first. If you’re driving away with the device armed it will display an indicator on your dashboard that will flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate just as normal. If you don’t enter your PIN at this time, the indicator will continue to flash and will require a new pin code every time you try to start your car.

Leave a Reply

Your email address will not be published. Required fields are marked *