Replacement Double Glazing Window Handles

When a double-glazed window handle is damaged, it’s crucial to replace it to ensure safety and function.

uPVC handles operate on a spindle which runs through the middle of the handle and through the lock mechanism in the window frame.

The step height of a uPVC handle is determined by examining the screw cap caps that are located on the inside of the handle.

Tilt & Turn

In Europe, tilt and turn windows have become a popular option. However they are only getting more popular in the UK. The advanced functionality of these windows makes them a great option for new constructions and renovation projects. They are easy to close or open to let light and air into your home.

They also provide better airtightness than other window types due to the locking points on the sash and the rubber seal that runs across the entire perimeter of the frame. Unlike uPVC casement windows, tilt and turn windows are opened from both the top and bottom and allows you to clean the exterior of windows from inside your home.

If you are replacing the tilt and turn window handle, it is essential to think about the step height of your handle. This is the distance from the bottom of the handle to the point where it is attached to the frame of the window. It is essential to get this right since if you don’t, your window won’t be able to open correctly.

Generally speaking, the standard step height for a UPVC or aluminum tilt and turn window is 21mm. Make sure that the handle you choose comes with this same step height to ensure it will fit your existing window.

When selecting the replacement tilt and turn window handle, you should also consider the kind of operation. Some handles feature a lever which is locked down, up at a 90 degree angle to tilt, and straight up to open. This is known as a “tilt before turn” (TBT) safe handle. You should utilize this feature when your children are around your home.

A spindle is typically found on the handle of many tilt and double glazed window handles turn windows. This spindle can be adjusted to different locations, similar to the door lock. The length of the spindle is also different. Some have a longer spindle that can be adjusted using an screwdriver. Others have a smaller spindle, which is adjusted by loosening an incredibly small screw inside the handle base.


Casement windows are extremely popular for a variety reasons. It is simple to set up and offers outstanding energy efficiency and noise reduction. However, there are some common problems with these windows that homeowners must be aware of. For example, if your casement window handle fails it may be difficult to open the window.

There are easy steps you can follow to replace your window handle and get it back to working. Whether your casement window is old or new you can follow these steps to ensure that your home is secure and safe.

If your uPVC casement window has been damaged, it is important to fix it as quickly as you can. This will help to protect your home and deter burglars. There are many alternatives to replace window handle your window handle, including the cockspur handle and espag handles. It is crucial to select the appropriate handle for your window. If you’re having difficulty opening your window, it’s likely that the handle’s spindle in the handle has worn out.

There are some important aspects to take into consideration when replacing a window handle the handles on your uPVC window casement. This includes the size of the handle and the screw centres and the spindle size. You should also consider the lock’s design and colour. The kind of handle you choose will determine the mechanism used to lock your window.

Espag handles are commonly used on uPVC window frames in the present. These handles operate the espagnolette multipoint locks that are installed on your uPVC windows. They are available in a variety of colours and are available in locking or non-locking versions. They are available in right and left opening options.

Cockspur handles can still be found on older uPVC windows, however they aren’t used in the new double glazing windows handles-glazed windows. The aluminium counterpart has a lower step height. The aluminum version has 9mm of step height, while the typical 21mm handle is employed.

Another option for replacement double glazed window handles is to use spade or blade handles. These handles are like cockspur handles however they have a smaller spindle. They are usually found on older wooden frame double-glazed windows, however they can also be found on some uPVC cottage windows.


If you have an old sash window, you may need to replace the handles. This is because windows of this kind typically have a system that comprises the counterweight, sash cord pulley, and rails that allow the sash to move upwards and downwards with ease. The sash’s movement blocks moisture from getting into the frame, which can cause mould and wood rot. It also permits you to open the windows to let in fresh oxygen.

You’ll need to measure the spindle of your sash windows in order to determine the correct handle. This can be found by looking at the back of the handle’s base and measuring how far it goes into the frame. It is also important to take into consideration the window’s hand, i.e. The handle can open either clockwise or anti-clockwise, depending on whether it is right-handed.

After you’ve selected the best handle for your window, you’ll need to determine if it requires a tilt latch. A tilt latch is utilized to ensure that the window is up and is able to be fitted on single or double-glazed windows. There are three kinds of tilt latches: internal, slide-in and surface mounted.

You can also install the sashlock onto your sash windows to increase security. This will protect the opening of your window and prevent it from being opened by burglars.

There are many different styles of sash handles to choose from, with Espag handle designs being the most common for uPVC windows. They are usually slim and round, with a locking mechanism however, you can also find cockspur handle and monkey tail handle styles. These are more suitable for traditional windows and have an attractive look. However they can also be used on casement windows.

Vertical Sliding

While horizontal sliding windows are a favorite choice for large windows, vertical ones are ideal for smaller spaces. These windows are easy-to-clean and offer excellent ventilation. They are also more cost-effective because they don’t need any maintenance. However, they are prone to deterioration if you accidentally drag them around forcefully. This is why it is essential to install these windows in an area that is safe of pets and children.

Vertical sliding windows can be opened by a simple movement left or right within the same frame. They are usually operated by a spiral balance that is comprised of a metal strip that protrudes from one side of the window and is twisted into a coil. When the window is opened, the spiral’s hidden end rotates so that the sash can be raised or closed.

The most popular type of vertical sliding windows is made of real timber and gives your home a classic style. If you prefer a modern style, PVC-U can be found in a variety of colors and finishes to match your preferences. Some manufacturers even offer a woodgrain effect for an authentic appearance.

Vertical sliding windows are simpler to open than double glazed window handle-hung windows in some situations. They are also less susceptible to water damage than wooden windows, which makes them an ideal choice for homes with children or seniors.

Certain homeowners put security features on their new sliding windows to keep unwanted guests away from the home. The simplest way to accomplish this is to wedge the lower sash with scrap wood. You can then secure the scrap wood to the frame in order to prevent it being fully open. If you’re looking for an even more sophisticated solution, consider adding a keyed sliding-bolt lock to the frame. This will give you peace of mind that your windows are secure and your family will be able to access them easily in case of emergency.

Leave a Reply

Your email address will not be published. Required fields are marked *